| Customization: | Available |
|---|---|
| Movement Way: | Combined |
| Atomization: | Pressure Atomization |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application area:
This machine with 2 heating zone 2M*2, one 2M cooling zone and robot hand automatic unloading system
IR Drying tunnel for variety of screen printing, pad printing and spraying thermosetting ink processing such as heat press, electric products, ( silicon, electric membrane film key press, window glass. )
This conveyor dryer is widely used in the drying of screen printing industry,is especially suitable for solidifying heat-set and special type of printing ink.This tunnel dryerenables the production of printed products with good colorfastness, high flexibility and high gloss.
robot hand automatic unloading system can be for 0.1mm paper too.
Air circulation within the drying unit is assured, with regard to ink type and printed material characteristics, by:
a. Air circulation by air blow from above and suction beneath the reticular transport belt
This mode is appropriate for drying of low-vapor inks, for heavier-than-air particles, for light printed materials (paper, foils, etc.), which need vacuum to be firmly fixed to the transport belt because of air blow importance.
The tunnel oven is equipped with an automatic mechanism for prevention of rate decrease when transport is loaded with printed material. In such a case, drying efficiency is not decreased.
b. Air circulation by air blow from above and suction partially from above, partially from beneath
This mode of drying assures fixation of printed material onto the reticular transport belt, water vapor suction is assured above, by the shortest course.
1.1 Cooling unit with air at ambient temperature
Some printed materials need to be cooled before grabbing or stacking.
The unit consists of two fans: one's function is to suck ambiental air in and blow it onto the printable material through the air-jets, the other's functions is to suck air from the cooling unit and exhaust it outside the premises.
It equipped with an automatic stacking device for printed material after printing and drying in a tunnel oven with a transport belt.
Advantages and benefits
· Modern design.
· Simple use; fast adjustments and reliable operation.
· Possibility of alignment with various tunnel ovens with a transport belt.
· Device replaces monotonous printed material stacking. The operator's only task is to adjust rapport elements for corresponding printed material size and removal of printed material after a finished series or when the tray is full. Investment usually pays off within the first year.
machine consists of:
· The device is fixed onto the output section of the tunnel oven.
· Manipulator with pneumatic holders to move the sheet into the tray.
· Rapport elements for adjustment of the stacking point.
· Lateral alignment of individual printed sheets.
|
1. |
Conveyor length :8000mm |
|
2 |
Conveyor width:600mm |
|
3 |
machine size: (L)8100x(W)1050x(H)1260mm |
|
4 |
Heating area:4m , 2m/section,total 2 sections |
|
5 |
working power: AC 380V 50HZ |
|
6 |
UV Lamp power:12PCS*800W , Total wattage:12KW |
|
7 |
Temperature adjustment: 0-200 Centigrade |
|
8 |
Conveyor speed:0~20m/min,Hight of the entrance :120mm |
|
9 |
Gross weight: 1170 KG |
|
Warranty |
For all our machines, we provide one-year warranty.lifelong maintenance |
Welcome to Dong guan, China, Welcome to Eco Printing
Customers are our friends, business integrity is our purpose
Hope our friendship last forever.
){kind=link}